ELECTRONICS MECHANIC
As a ELECTRONICS MECHANIC, WG-2604-11, you will (1) Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include:
navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment. (2) Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft. Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). (3) Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks. (4) Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. (5) When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. (6) Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. (7) Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (8) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (9) Performs other duties as assigned. Details of the duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). GENERAL
Experience:
Experience or training which demonstrates the applicants knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics. SPECIALIZED
Experience:
Must possess at least 18 months of experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Multiple vacancies may be filled from this announcement. g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.
Estimated Salary: $20 to $28 per hour based on qualifications.
navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment. (2) Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft. Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). (3) Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks. (4) Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. (5) When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. (6) Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. (7) Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. (8) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. (9) Performs other duties as assigned. Details of the duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp NATIONAL GUARD MEMBERSHIP IS REQUIRED:
This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. MILITARY MEMBERS WITH BONUSES:
Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). GENERAL
Experience:
Experience or training which demonstrates the applicants knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics. SPECIALIZED
Experience:
Must possess at least 18 months of experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Multiple vacancies may be filled from this announcement. g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.
- Department:
2604 Electronics Mechanic - Salary Range:
$21.33 to $24.92 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
